Not all CTC products are listed on our website, if there’s a specific product you require, please Contact Us. Categories: All 100mV/g Accelerometers Single Axis Standard Compact Miniature Triaxial Ultrasound Response 4-20mA Loop Power Sensors Proportional Velocity Proportional Acceleration Signal Conditioners Cables Junction Boxes Switched Output Individual Output Mounting Hardware Magnets Flat Magnets Curved (2 pole) Magnets Fin Mounts Mounting Pads Threaded Hole Stud Hazardous Area Dynamic Output (100mV/g) 4-20mA Loop Power Barriers 10mV/g Accelerometers 50mV/g Accelerometers 500mV/g Accelerometers Single Axis Triaxial 1000mV/g Accelerometers Single Axis Triaxial All / Mounting Hardware Magnets | Fin Mounts | Mounting Pads | All 100mV/g Accelerometers 4-20mA Loop Power Cables Junction Boxes Mounting Hardware Magnets Fin Mounts Mounting Pads Hazardous Area 10mV/g Accelerometers 50mV/g Accelerometers 500mV/g Accelerometers 1000mV/g Accelerometers MH104-1B | Flat Surface Magnet Mounting Base With 1/4-28 Integral Mounting Stud, 60 lbs. Pull Strength, 1.25” (31.75mm) OD, 0.46” (11.68mm) Height MH103-1B | Flat Surface Magnet Mounting Base With 1/4-28 Integral Mounting Stud, 40 lbs. Pull Strength, 1” (25.4 mm) OD, 0.46” (11.68 mm) Height MH136-1A | Flat Surface Magnet Mounting Base With 1/4-28 Integral Mounting Stud, 25 lbs. Pull Strength, 0.75” (19.05 mm) OD, 0.45” (11.43 mm) Height MH154-1B | Flat Surface Magnet Mounting Base, 15 lbs. Pull Strength, 0.58” (14.73 mm) OD, 0.33” (8.38 mm) Height, 10-32 Integral Mounting Stud MH123-1A | Flat Surface Magnet Mounting Base With 1/4-28 Threaded Blind Tapped Hole, 60 lbs. Pull Strength, 1.25” (31.75 mm) OD, 0.68” (17.27 mm) Height MH122-1A | Flat Surface Magnet Mounting Base With 1/4-28 Threaded Blind Tapped Hole, 40 lbs. Pull Strength, 1” (25.4 mm) OD, 0.68” (17.27 mm) Height MH149-1A | Flat Surface Magnet Mounting Base With 1/4-28 Threaded Blind Tapped Hole, 25 lbs. Pull Strength, 0.75” (19.05 mm) OD, 0.68” (17.27 mm) Height MH214 | Multipurpose 2 Rail Magnet Mounting Base With 1/4-28 or M6 Blind Tapped Hole and Integral Rotating Mounting Nut, 50 lbs. Pull Strength, 1.4" (35.56 mm) OD, 0.75" (19.05 mm) Height MH114 | Multipurpose 2 Rail Magnet Mounting Base With 1/4-28 Blind Tapped Hole, 50 lbs. Pull Strength, 1.4" (35.56 mm) OD, 0.75" (19.05 mm) Height MH114-3T | Multipurpose 2 Rail Magnet Mounting Base With 1/4-28 Tapped Hole and Triaxial Alignment Notch, 50 lbs. Pull Strength, 1.39" (35.31 mm) OD, 0.85" (21.59 mm) Height MH115-2A | Multipurpose 2 Rail Magnet Mounting Base With 1/4-28 Blind Tapped Hole, 95 lbs. Pull Strength, 1.85" (46.99 mm) OD, 1.08" (27.43 mm) Height MH140-1A | Ultra Strong Multipurpose 2 Rail Magnet Mounting Base With 1/4-28 Blind Tapped Hole, 120 lbs. Pull Strength, 1.85" (46.99 mm) OD, 1.1" (27.94 mm) Height MH128-1A | Multipurpose 2 Rail Magnet Mounting Base With 1/4-28 Blind Tapped Hole, 30 lbs. Pull Strength, 1" (25.4 mm) OD, 0.94" (23.88 mm) Height MH112-1A | Multipurpose 2 Rail Magnet Mounting Base With 1/4-28 Integral Stud, 30 lbs. Pull Strength, 1" (25.4 mm) OD, 0.68" (17.27 mm) Height MH137-1A | Multipurpose 2 Rail Magnet Mounting Base With 1/4-28 Integral Stud, 15 lbs. Pull Strength, 0.75" (19.05 mm) OD, 0.68" (17.27 mm) Height MH118 | Motor Fin Mount Probe Pad - 1" (25 mm) Diameter
