AT-2040 | Feature-Rich High Tier Shaker

£0.00

Introducing the AT2040 Portable Vibration Calibrator, shaker table, and sensor simulator. This portable shaker table features A2LA accredited calibration to the international standard ISO/IEC17025:2017 with a frequency range of 5 Hz – 10k Hz. *

AT2040 portable vibration calibrator device comes with three main modes of operation.

  •  Mode one is a “shake” operation in which the PVC operates as a simple shaker table. This is useful for performing end-to-end checks or other vibration testing where accelerometer sensitivity is not needed.

 

  • The second mode to select from is “test” mode which displays the accelerometer or proximity probe sensitivity reading. These readings can be done in manual mode or full automatic mode. When performing sensitivity test in full automatic mode, a PDF certificate is also generated by the AT-2040 portable vibration calibrator.

 

  • The third main method of operation is “simulate” mode. Simulator mode is similar to “shake” mode, but a function generator is used instead of the electrodynamic shaker. The advantages of using simulator mode to perform vibration checks are numerous. The simulator is more accurate and performs over a wider range because it is not bound to the mechanical limitations of the electrodynamic shaker.

 

With AT-2040 you will find the features required for your application without having to install cumbersome and expensive addons. AT-2040 features a full-automatic sensitivity test mode, sensor simulation, power supply output for sensors that require voltage such as the 7310 and 991V aviation sensors, a built-in sensor charge amplifier for both single-ended and differential charge accelerometers, and a custom sensor input that can be configured to fit most accelerometers with a one to one cable. 

Introducing the AT2040 Portable Vibration Calibrator, shaker table, and sensor simulator. This portable shaker table features A2LA accredited calibration to the international standard ISO/IEC17025:2017 with a frequency range of 5 Hz – 10k Hz. *

AT2040 portable vibration calibrator device comes with three main modes of operation.

  •  Mode one is a “shake” operation in which the PVC operates as a simple shaker table. This is useful for performing end-to-end checks or other vibration testing where accelerometer sensitivity is not needed.

 

  • The second mode to select from is “test” mode which displays the accelerometer or proximity probe sensitivity reading. These readings can be done in manual mode or full automatic mode. When performing sensitivity test in full automatic mode, a PDF certificate is also generated by the AT-2040 portable vibration calibrator.

 

  • The third main method of operation is “simulate” mode. Simulator mode is similar to “shake” mode, but a function generator is used instead of the electrodynamic shaker. The advantages of using simulator mode to perform vibration checks are numerous. The simulator is more accurate and performs over a wider range because it is not bound to the mechanical limitations of the electrodynamic shaker.

 

With AT-2040 you will find the features required for your application without having to install cumbersome and expensive addons. AT-2040 features a full-automatic sensitivity test mode, sensor simulation, power supply output for sensors that require voltage such as the 7310 and 991V aviation sensors, a built-in sensor charge amplifier for both single-ended and differential charge accelerometers, and a custom sensor input that can be configured to fit most accelerometers with a one to one cable. 

Datasheet

  • A2LA Accreditation ISO/IEC 17025:2017*

    Quartz Reference Accelerometer

    Calibrated back to back with laser calibrated primary reference for increased accuracy.

    Simulation Mode.*

    Digital closed loop control.

    Digital Electronics

    100-240v power with standard plug receptacle and built in charger.

    Custom PC Software included to setup Full-Automatic Test Mode

    Built in Charge Converter

    IEPE, Voltage, charge (piezoelectric), 4-20mA, and proximity probe sensitivity readings

    Adjustable current and voltage

    Automatic PDF certificate generation tailored to your custom specifications

    Export Data to CSV.

    Connect to a PC through Wi-Fi and control the device from a remote location with Google Chrome’s built in VNC viewer

  • The AT2040 is packed with features and functionality. Comprehensive and user-friendly software tools help operators quickly identify and address issues in their vibration system setups

    Create calibration certificates for vibration instruments.

    Test all types of vibration sensors and transducers from a variety of accelerometer and eddy current probe manufacturers.

    Test and verify performance of vibration system meters, portable data collectors, and cabling by using an accurate and traceable signal generator to simulate a variety of sensors.

    Provides a closed loop controlled reference signal from 5 Hz to 10,000Hz for testing over a wide frequency range.

  • The AT2040 has many applications including:

    Cabling and wiring troubleshooting

    Vibration signal simulation—accelerometers and velocity probes

    Machinery speed signal simulation

    Calibration for:

    Accelerometers

    Proximity probes and drivers

    Monitoring systems

    Charge amplifiers

    Avionics equipment

  • AT2040 features a built-in Vibration Signal Generator capable of producing high-accuracy electrical signals over a wide frequency and amplitude range. Designed specifically to simulate accelerometer output, the AT-2040 accelerometer calibrator features the ability to simulate current, voltage, and charge signals that precisely mimic a variety of transducers and sensors. By using the simulator signal, the operator is able to produce signals over a larger range than using the vibration shaker alone.

    Simulator signal support for:

    IEPE

    Charge

    4-20ma

    Proximity probe

  • Proximity probe driver input

    -24-volt supply to power proximity probe drivers

    Built-in meter for displaying voltage on color display

    Accurate results for both AC and DC voltage.

    Connects directly to probe driver without any external equipment

    *Proximity Probe Kit is an add-on product.

  • Plugs directly into the calibrator without any external equipment

    Built-in +24-volt supply

    Current displayed in milliamps

    Sensitivity displayed on color LCD screen

  • Built in power supplies for powering accelerometers and proximity probe drivers:

    2-24 volt adjustable

    +24 volt fixed

    -24 volt fixed

  • Full Automatic Testing:

    Customize your full automatic test for one-button operation.

    Complete test to certificate in as little as 3 minutes!

  • The 8 pin input/output connector can support sensors needing power such as 3 or 4 pin accelerometers and it can be used to connect all three triaxial channels all at once. The AT2040 can also power sensors using its internal power supply. This eliminates the need for BNC breakouts and external power supplies.

    Below is a list of some common accelerometer examples that the AT-2040 can connect with one cable. Chances are, it supports your application as well. E-mail us for more details.

    Bently Nevada 330400

    Bently Nevada 330450

    Honeywell (Chadwick-Helmuth) Velcometer 7310

    Honeywell (Chadwick-Helmuth) Velcometer 866-1

    Aces Systems 991V

    Wilcoxon 991D

  • The built in charge amplifier can be used to read sensitivity on both differential and single-ended charge mode accelerometers. Below are some popular commonly used sensors:

    Dytran 330C1

    Dytran 3235

    Dytran 3035C

    Dytran 3055C

    Dytran 3085C

    Dytran 3088C

    Dytran 3092C

    Bently Nevada 330450

    Bently Nevada 330750

    Bently Nevada 350900

    Vibro-Meter CA 134 & CE 134

    Vibro-Meter CA 202

    Vibro-Meter CA 280

    Vibro-Meter CE 281

    Vibro-Meter CA 303

    Vibro-Meter CA 306

    Vibro-Meter CE 311

    CEC 40123

    CEC 4-125

    CEC 4-126

    CEC 4-128

    CEC 4-130

    CEC 4-137

    CEC 4-138

    CEC 4-170

    CEC 4-171

  • Universal Accelerometer Adapter Disc

    Universal Adapter Disc for Velocity Pickups

    1/4 Inch Mounting Spacer

    1/4-28 to 10-32 Stud

    1/4-28 to 1/4-28 Stud

    1/4-28 to 10-32 Adapter

    1/4-28 to 2-56 Adapter

    1/4-28 to 6-32 Adapter

    10-32 to BNC 3 foot in length low noise cable assembly

    Power Cord

    USB stick with custom PC software for auto-test and sensitivity setups.

    Short handle wrench