In contrast to the perma STAR VARIO (with battery pack), the perma STAR CONTROL is supplied with external power via cable. The operating status can be transmitted to a PLC and evaluated. The two integrated operating modes TIME and IMPULSE offer flexible use. In TIME mode, lubricant discharge is based on operating hours. In IMPULSE mode, a precisely defined quantity is dispensed as soon as voltage is supplied.
Pressure build-up of 6 bar allows remote mounting up to 5 m
LCD display with push button shows discharge settings, LC size and operating status
Setting: Mode, LC size, discharge quantity and PIN
Flexible handling via simple setting of TIME or IMPULSE mode; can be changed at any time
Fast, simple control of settings, remaining impulses or operating hours until exchange
Freely selectable PIN protects against possible tampering
Electromechanical drive with external power supply
LED (red / green) visible all round signals functioning and errors
Reliable, precise lubricant discharge independent of temperature and counter pressure
Quick function control due to visual or electronic signals on the lubrication system and plant error reporting system saves time and relieves maintenance workers
Pressure build-up to 6 bar allows remote mounting up to 5 m
Manual additional discharge via push button on display (purge)
Mounting up to 5 m outside of dangerous areas or at easy-to-access locations increases workplace safety
Higher equipment availability since LC can be easily exchanged during running operation
Lubrication point can be purged to clear blockages
In contrast to the perma STAR VARIO (with battery pack), the perma STAR CONTROL is supplied with external power via cable. The operating status can be transmitted to a PLC and evaluated. The two integrated operating modes TIME and IMPULSE offer flexible use. In TIME mode, lubricant discharge is based on operating hours. In IMPULSE mode, a precisely defined quantity is dispensed as soon as voltage is supplied.
Pressure build-up of 6 bar allows remote mounting up to 5 m
LCD display with push button shows discharge settings, LC size and operating status
Setting: Mode, LC size, discharge quantity and PIN
Flexible handling via simple setting of TIME or IMPULSE mode; can be changed at any time
Fast, simple control of settings, remaining impulses or operating hours until exchange
Freely selectable PIN protects against possible tampering
Electromechanical drive with external power supply
LED (red / green) visible all round signals functioning and errors
Reliable, precise lubricant discharge independent of temperature and counter pressure
Quick function control due to visual or electronic signals on the lubrication system and plant error reporting system saves time and relieves maintenance workers
Pressure build-up to 6 bar allows remote mounting up to 5 m
Manual additional discharge via push button on display (purge)
Mounting up to 5 m outside of dangerous areas or at easy-to-access locations increases workplace safety
Higher equipment availability since LC can be easily exchanged during running operation
Lubrication point can be purged to clear blockages
Drive
Electromechanical
Power supply
External: 9 - 30 V DC, I (max) 0,5 A
Discharge period
1, 2, 3, ..., 12 months / Impulse control
Lubricant volume
60 cm³, 120 cm³, 250 cm³, 500 cm³
Operating temperature
-40 °C to +60 °C
Pressure build-up
6 bar
Number of outlets
1
Protection class
IP 65
Lubricants
Grease up to NLGI 2 / oil
Max. tube lengths
5.00 m
Impulse controlled
CE
